Environmental impact assessment of a proposed info-tech complex in East Calcutta wetlands

An info-tech complex is proposed for 286 acres (116 ha) of land within the East Calcutta wetlands. The proposed site is 15 km east of Kolkata city and only 8 km south of Dum Dum airport. The site is vacant, with pockets of agricultural land and a few degrading water-logged areas. In order to assess the likely impact of the proposed development on the environment, a rapid environmental impact assessment of an area of 10 km radius from the centre of the project site was carried out. The present status of the environment with respect to ambient air, surface water, groundwater, soil, landuse, noise, and socio-economics of the core and buffer zone has been documented and correlated with 24 project activities during construction, development and operational phases. The frequency of adverse impacts is greater than that of beneficial impacts. Out of the total adverse impacts 20 are short term, reversible and have a low magnitude. The total impact score for the proposed project is (–)468.75 and as per the Assessment Value Index Scale the environmental impact of the proposed project activities is no appreciable impact. But there are certain sectors where the environment will be adversely impacted. Therefore, appropriate measures have been suggested to ameliorate the adverse impacts. It is envisaged that if these measures are implemented then there will be an improvement in the quality of the environment, as well as life, by 687.5 units.     

Environmental impact of coal washery and Damodar River water on the morphometry and biochemical changes of maize (Zea mays L.) and soil health

Enormous quantity of water is used for coal beneficiation and accordingly huge amount of effluents are being generated. In this study an attempt was made to evaluate the potential of this effluent water for irrigation. Water samples were collected from three different points (a) feeding point, (b) thickening point, and (c) outlet point of coal washery, and from Damodar River for monitoring the water quality. The samples were analyzed for various parameters and compared with prescribed standard, which revealed that the total suspended solids of thickening point and Damodar River were higher. A pot experiment with maize was conducted to study the suitability of this coal washery water for irrigation. Pots were irrigated with water from the three points of washery and Damodar River in two concentrations (100% and 50% dilution with distilled water); pure distilled water was used for control. There was 100% germination in all the treatments. The plant growth, chlorophyll content and soil quality parameters were significantly better in washery and Damodar River water treated pots. The Damodar River water and washery water from feeding and outlet point could be successfully used for irrigation. In general mixing with good quality water has shown better results.     

Uptake studies of environmentally hazardous (51)Cr in Mung beans

Attempt has been made to study the accumulation behaviour of a common plant, Mung bean (Vigna radiata) towards Cr(III) and Cr(VI) to have an insight on the migration and bio-magnification of Cr. For this purpose healthy germinated Mung bean seeds were sown in the sand in the presence of Hoagland's nutrient solution containing measured amount of K(2)(51)Cr(2)O(7) and (51)Cr(NO(3))(3).9H(2)O. Growth rate was also studied in the presence and absence of phosphate salts in the medium. It has been found that the transfer of chromium from soil to plant is significantly low (maximum 5% for both Cr(III) and Cr(VI)). Maximum accumulation of Cr occurs in the root with respect to the total chromium accumulation by the plant. Other parts of the Mung bean plant, e.g. cotyledons, shoot and leaves, show negligible accumulation. Therefore, the chance of direct intake of Cr through food as well as through the grazing animals to human body is less.     

Residual fate and persistence of endosulfan (50 WDG) in Bengal gram (Cicer arietinum)

A detailed study has been presented on heavy metal content of the Iture Estuary. Waters of the Sorowie and Kakum rivers that supply water into the Estuary were investigated to ascertain heavy metal pollution levels due to anthropogenic activities. Concentration s of Cd, Zn, Se and Pb were measured. The study shows pre-occupying pollution levels that constitute a threat to both terrestrial and aquatic ecosystems. The abundance of metals in the Estuary is in the order Zn > Pb > Cd > Se. The level of Cd in the Iture Estuary ranged between 0.011 mg/l and 0.041 mg/l while Se was in the range 0.018 mg/l to 0.029 mg/l, Pb 0.020 mg/l to 0.075 mg/l and Zn 0.040 to 2.45 mg/l. The impact of contaminated water from the Sorowie River on the Iture Estuary was outstanding and the study points out the importance of the Sorowie River as a primary pollution source to the Iture Estuary. The pollution of the Iture Estuary was found to be connected to human activities in its catchments.     

Lower Leg Injury Reference Values and Risk Curves from Survival Analysis for Male and Female Dummies: Meta-analysis of Postmortem Human Subject Tests

Objective: Derive lower leg injury risk functions using survival analysis and determine injury reference values (IRV) applicable to human mid-size male and small-size female anthropometries by conducting a meta-analysis of experimental data from different studies under axial impact loading to the foot–ankle–leg complex.

Methods: Specimen-specific dynamic peak force, age, total body mass, and injury data were obtained from tests conducted by applying the external load to the dorsal surface of the foot of postmortem human subject (PMHS) foot–ankle–leg preparations. Calcaneus and/or tibia injuries, alone or in combination and with/without involvement of adjacent articular complexes, were included in the injury group. Injury and noninjury tests were included. Maximum axial loads recorded by a load cell attached to the proximal end of the preparation were used. Data were analyzed by treating force as the primary variable. Age was considered as the covariate. Data were censored based on the number of tests conducted on each specimen and whether it remained intact or sustained injury; that is, right, left, and interval censoring. The best fits from different distributions were based on the Akaike information criterion; mean and plus and minus 95% confidence intervals were obtained; and normalized confidence interval sizes (quality indices) were determined at 5, 10, 25, and 50% risk levels. The normalization was based on the mean curve. Using human-equivalent age as 45 years, data were normalized and risk curves were developed for the 50th and 5th percentile human size of the dummies.

Results: Out of the available 114 tests (76 fracture and 38 no injury) from 5 groups of experiments, survival analysis was carried out using 3 groups consisting of 62 tests (35 fracture and 27 no injury). Peak forces associated with 4 specific risk levels at 25, 45, and 65 years of age are given along with probability curves (mean and plus and minus 95% confidence intervals) for PMHS and normalized data applicable to male and female dummies. Quality indices increased (less tightness-of-fit) with decreasing age and risk level for all age groups and these data are given for all chosen risk levels.

Conclusions: These PMHS-based probability distributions at different ages using information from different groups of researchers constituting the largest body of data can be used as human tolerances to lower leg injury from axial loading. Decreasing quality indices (increasing index value) at lower probabilities suggest the need for additional tests. The anthropometry-specific mid-size male and small-size female mean human risk curves along with plus and minus 95% confidence intervals from survival analysis and associated IRV data can be used as a first step in studies aimed at advancing occupant safety in automotive and other environments.     

Impact of industrial waste effluents on river Damodar adjacent to Durgapur industrial complex, West Bengal, India

The present study deals with the characterization of industrial effluents released from various industries and distribution of heavy metals in effluent discharge channel and its impact on the river Damodar. The effluent of tamlanala, a natural storm water channel, is extensively used for irrigation for growing vegetables in and around the study area. The heavy metals in water of the study area are in the order of Fe > Mn > Pb >?Cd and sediments follow similar trends too. The enrichment of heavy metals in the sediments are in the order of Cd (39.904) > Pb (33.156) > Mn (0.164) > Fe (0.013). The geoaccumulation index values reveal effluent channel is subjected to moderate to high pollution with respect to Cd (4.733) and Pb (4.466). The analyzed data for enrichment factors and the pollution load index (1.305) show that effluent channels have suffered from significant heavy metal contamination following industrialization and urbanization. Compared to baseline values, the surface sediment layers show high enrichment across the channel and at its discharge point. The factor analysis reveals three factors—industrial sources, surface runoff inputs, and background lithogenic factors which clarify the observed variance of the environmental variables. Metal pollution assessment of sediments suggests that pollution from the heavy metals observed is high in the tamlanala which in turn affects the downstream of the river system.     

X-ray absorption and photoelectron spectroscopy investigation of selenite reduction by Fe-bearing minerals

The long-lived radionuclide ⁷⁹Se is one of the elements of concern for the safe storage of high-level nuclear waste, since clay minerals in engineered barriers and natural aquifer sediments strongly adsorb cationic species, but to lesser extent anions like selenate (Se^VIO₄²⁻) and selenite (Se^IVO₃²⁻). Previous investigations have demonstrated, however, that Se^IV and Se^VI are reduced by surface-associated Fe^II, thereby forming insoluble Se⁰ and Fe selenides. Here we show that the mixed Fe^II/^III (hydr)oxides green rust and magnetite, and the Fe^II sulfide mackinawite reduce selenite rapidly (< 1 day) to FeSe, while the slightly slower reduction by the Fe^II carbonate siderite produces elemental Se. In the case of mackinawite, both S^−II and Fe^II surface atoms are oxidized at a ratio of one to four by producing a defective mackinawite surface. Comparison of these spectroscopic results with thermodynamic equilibrium modeling provides evidence that the nature of reduction end product in these Fe^II systems is controlled by the concentration of HSe⁻; Se⁰ forms only at lower HSe⁻ concentrations related to slower HSeO₃⁻ reduction kinetics. Even under thermodynamically unstable conditions, the initially formed Se solid phases may remain stable for longer periods since their low solubility prevents the dissolution required for a phase transformation into more stable solids. The reduction by Fe²⁺-montmorillonite is generally much slower and restricted to a pH range, where selenite is adsorbed (pH < 7), stressing the importance of a heterogeneous, surface-enhanced electron transfer reaction. Although the solids precipitated by the redox reaction are nanocrystalline, their solubility remains below 6.3 × 10^− 8 M. No evidence for aqueous metal selenide colloids nor for Se sorption to colloidal phases was found. Since Fe^II phases like the ones investigated here should be ubiquitous in the near field of nuclear waste disposals as well as in the surrounding aquifers, mobility of the fission product ⁷⁹Se may be much lower than previously assumed.     

Laccase mediated biodegradation of 2,4-dichlorophenol using response surface methodology

The effects of different environmental parameters, i.e., pH, temperature, time and enzyme concentration on the biodegradation of 2,4-dichlorophenol (2,4-DCP) in aqueous phase was evaluated with laccase from Pleurotus sp. using response surface methodology (RSM) in the present investigation. The Box-Behnken design of experiments was used to construct second order response surfaces with the investigated parameters. It was observed that the maximum degradation efficiency of approximately 98% was achieved at pH 6, temperature of 40 degrees C, time 9h and an enzyme concentration of 8IUml(-1). The adequacy of the model was confirmed by the coefficient of multiple regression, R(2) and adjusted R(2) which were adjudged to be 87.9% and 73.6%, respectively indicating a reasonably good model for practical implementation. Despite the fact that many successful attempts have been taken in the past for biodegradation of 2,4-DCP using whole cells, the present study emphasizes the fastest biodegradation of 2,4-DCP, a potent xenobiotic compound.     

Status of air pollution caused by coal washery projects in India

The importance of coal washeries in India is growing as local coals have a high ash content. At present, there are 23 coal washeries with an annual rated input of 45 Million Tonnes. During the various operations in washeries, large amounts of dusts and gaseous pollutants are generated. Four coal washery projects were surveyed to study their air pollution characteristics. Air monitoring stations were set up in local industrial, residential and sensitive areas and air pollution samples were collected along with micro-meteorological data. Diurnal variations of SPM, SO₂ NO_x and CO are discussed. SPM concentrations were found to exceed the permissible limits at all locations. SO₂ and NO_x were also found to exceed the permissible limit in residential and sensitive areas. It was observed that about 50% of the dust particles were less than 10 µ in diameter. Benzene soluble matter in SPM ranged from 45–62%.     

Toxicity of organic mixtures saturated in water to Daphnia magna. Effect of compositional changes

The toxicity of aqueous solutions saturated with mixtures of hydrophobic organic liquids is contrasted to that of solutions prepared from solids. Data for a variety of mixtures are presented and are related to the solubilities of the components. It is shown that in the absence of biological interactive effects, the toxicity of a component in a saturated mixture of liquids will be equal to or less than that of a corresponding solution of its most toxic component. In contrast, for solutions derived from a mixture of solids, the toxicity will equal or exceed that of a corresponding saturated solution of its most toxic component, and will tend to increase with the complexity of the mixture.